Wired Microphones Common Problems and Solutions

- Apr 18, 2019-

There is no sound in the microphone. The switch is in the OFF state. The switch is turned ON.

Amplifier power is not turned on. Turn on the power amplifier.

The MIC volume of the amplifier is at the minimum position. Turn up the volume of the MIC.

The speakers are not connected or work poorly. Check the speakers and wiring to keep working.

The cable of the microphone is not connected or damaged. Replace the cable and plug in the connector. The microphone output has a noise.

The speakers are not connected or work poorly Check the speakers and wiring to keep working well.

The microphone cable is not connected or damaged. Replace the cable and plug in the connector.

The distance between the mouth and the microphone is too close. The distance between the mouth and the microphone should be between 10 and 20 cm and the angle is 45 degrees.

The amp is not working properly or the tuning is defective. Check the amplifier and adjust the microphone according to the actual situation. The shape of the whistling room and the acoustic condition. The reasonable use of the sound absorbing material. The microphone directly faces the speaker to avoid the microphone being too close to the speaker and the speaker. The microphone and the speaker are kept at a distance of more than 1.5 meters. The amplifier is not working properly or the tuning is defective. Check the amplifier and adjust the sound according to the actual situation.

 

About MAONO

Maono Technology Co., Ltd. is a professional manufacturer for microphones, headphones, PA systems and accessories in Shenzhen, China. 

Our products are passed CE, FCC, RoHS, PSE and KC certifications. The factory is qualified with ISO9001:2015, ISO14001:2015 and BSCI certifications. Welcome to visit our factory. We are looking for our brand distributors. Support small orders and short delivery time. Please contact us freely.     

www.maonotech.com