Signal Connection Problems of Sound System

- Jul 17, 2018-

1. The connection between the audio source playback device and the mixer: various CDs, DVDs, MDs, decks, etc. should be connected with the matching cable and the mixer, usually plugged into the high-impedance port.

2. Wired dynamic microphones, condenser microphones, etc. are generally inserted in the XLR low-resistance port. However, the wireless microphone signal is amplified by the receiver, and it is necessary to experiment to know which end is suitable.

3. In principle, the signal output by the band and other devices should be inserted in the high-impedance port, but if the line is long and the interference is large, it can also be inserted in the low-resistance signal port.

 

About MAONO

MAONO is an innovative designer and manufacturer of Lavalier, Podcasting, Wireless, Shotgun, Recording microphones and accessories for Smartphone, Camera and PC, etc. 

www.maonotech.com