How Does the Recording Work in Post-synthesis?

- Sep 26, 2018-

First, perform noise sampling. After recording the recording button, the recording starts to the short track before the song is officially sung. This track is definitely thicker than the silent area, which we call normal noise. Select this normal noise, point effect - noise cancel - noise reducer, a screen will pop up, point noise sampling, then point off, return to the mono editing screen, then select all the tones, enter the noise reducer again, adjust The noise reduction level below starts from 100%, decrements every 5%, previews, listens with the ear, and feels the noise will not make people worse.

Secondly, the recording should not be reinforced with a microphone, so that although you can hear your own voice, this is not only the current is very loud, but the worst is that the noise is not good, and the sampling is not good.

Again, breathing. A good song is a need to breathe too much, no breathing sounds too monotonous, too rigid, too much breathing and too messy, too unnatural, recording and singing different, because of the problem of wheat, cannot pull very well Turn on the distance between the microphone and the mouth, so after you have finished the noise, you can listen to your own tone and mute those places where you don't need to breathe.

Finally, pay attention to the accompaniment problem. If the accompaniment sound is loud, if you feel too much reverberation and the bass is too heavy, you can follow the "accompaniment processing" in the "Effect Editing Flow Chart".

 

About MAONO

MAONO is an innovative designer and manufacturer of Lavalier, Podcasting, Wireless, Shotgun, Recording microphones and accessories for Smartphone, Camera and PC, etc. 

www.maonotech.com